Manualshelf

User's Manual

ManualsBrandsClimax Technology ManualsAlarm SystemsSmart Home Alarm System
21222324252627282930
19
to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before
the Entry Delay Timer expires, the alarm will be activated and the panel will send
report.
Entry Delay 2 for Arm Away: Set Entry Delay Timer 2 for Away Arm mode. When a
sensor set to Start Entry Delay 2 is triggered under Away Arm mode, the control panel
will begin Entry Delay Timer countdown according to duration set with this option
If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns
to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before
the Entry Delay Timer expires, the alarm will be activated and the panel will send
report.
Exit Delay for Arm Away: Set the Exit Delay Timer when entering Arm Away mode.
When the user changes system mode to Away Arm, the panel will begin Exit Delay
Timer Countdown and enter Away Arm mode when the timer expires. The user must
leave area protected by sensors before the timer expires, otherwise an alarm will be
activated with the sensor is triggered.
Exit Delay for Arm Stay: Set the Exit Delay Timer when entering Arm Stay mode.
When the user changes system mode to Arm Stay, the panel will begin Exit Delay
Timer Countdown and enter Arm Stay mode when the timer expires. The user must
leave area protected by sensors before the timer expires, otherwise an alarm will be
activated with the sensor is triggered.
Alarm Length: Set the duration the external siren should sound when an alarm is
activated. For EN Grade 2 Compliance, this should be set to a minimum of 1 minute.
Swinger Shutdown: This indicates the maximum number of Events that will be
recorded by an individual device per Set/Unset period. For EN Grade 2 Compliance,
this must be set between 3 and 10.
5.2. Sound Setting
The sound setting determines panel indication sound configuration. To change existing setting,
click “Edit”.
Entry Delay Sound for Arm Away: this is for you to decide whether the Control Panel
sounds count-down beeps and volume of beep during the entry delay time in Away Arm
mode.
Exit Delay Sound for Arm Away: this is for you to decide whether the Control Panel
sounds count-down beeps and volume of beep during the exit delay timer in the Away
Arm mode.