User's Manual

23
5.7. Wi-Fi Setting
The Wi-Fi setting allows you to check panel broadband setting, and determine whether Ethernet
connection should be bypassed.
<NOTE>
 For EN Grade 2 Compliance, Ethernet Bypass must be set to “Disable”:
5.8. Miscellaneous Setting
The Miscellaneous Setting includes following setting option:
 Tamper Alarm: Select when the panel should activate alarm if tamper switch is
triggered.
 Arm Away: when tamper is triggered under Away Arm mode, Control Panel raises
a local alarm and sends report to the monitoring center. While under Arm Stay or
Disarm modes no alarm will be activated, nor report sent.
 Always: Control Panel raises a local alarm and send report for tamper-trigger in all
modes.