User's Manual

8. System Operation

8.1 Faults and Tampers

8.1.1 Fault and Tamper Status:

The Control Panel is capable of monitoring the system for any faulty conditions. When any fault

event is detected, the amber Fault LED on the Control Panel and Remote Keypad (KP-35) will

light up to indicate the situation. The fault event will be logged and reported to destinations

programmed under Report setting accordingly. The remote keypad as well as the Customer and

Installer webpages will also display fault event information. Refer to table below to solve the

faults and pictures below to view the fault history.

<NOTE>

 After solving the fault events, use the Remote Keypad to clear the fault events to

remove the fault event display on the Control Panel webpage, or the fault event will

remain even after they have been solved.

For a list of all Panel Faults, please see Appendix B.

8.1.2 Viewing Faults on webpages:

Customer Interface: Issues Box on the “System Summary” page:

Installer Interface: “Active Trouble Conditions” on the “System Check” tab: