User's Manual

1. Introduction

HSGW-Gen2-V1 is a fixed wall mounting wireless alarm system control panel. It is designed to

protect your home by forming an alarm system with various wireless sensors. When an intruder

is detected, the wireless sensor will transmit signal to the control panel to raise an alarm and

report to the Central Monitoring Station.

HSGW-Gen2-V1 features RF and Z-Wave wireless protocol for communication with accessory

devices. The RF devices are simple and easy to use while the Z-Wave devices, using

corresponding network, is capable of performing more advanced function and add flexibility to

alarm system such as using Remote Keypad to control system mode, view alarm memory and

event log, or capturing alarm pictures using PIR Camera to send to panel wirelessly for alarm

visual verification.

Integrating IP, GSM, Z-Wave and RF for multi-path reporting, HSGW-Gen2-V1 features a

user-friendly webpage for the user to connect via Local Area Network for easy programming and

control.

1.1. System Specification

Function

Zone Number 160 Wireless Zones

Area Number 2

Zone Types Start Entry Delay, Burglar Follow, Burglar Instant, Burglar

Outdoor, 24 Hours, Fire, Medical, Emergency, Emergency

(Quiet), Water, Set/Unset, Silent Panic, CO, Gas, Heat

For information on configuring Zone Groups, please see

Appendix A

User PIN Codes 6 Users, 1 PIN Code each user (6-digits, number 0~9), available

combination from 000002~999999 (999998 different

combinations, 000000 and 000001 are disallowed).

Note: Input of 5 invalid User PIN codes at the remote keypad will

lock the remote keypad for 15 minutes.

Control Facilities Remote Keypad & Remote Controller

larm.com Server Webpages

Report Destinations 20 Monitoring Stations or mobile number

Reporting Format Contact ID, SIA, SMS Text,

Arming Modes Away, Home 1, Home 2, Home 3

Alarm Type Burglar, Panic, Fire, Medical, Emergency, Water, Silent

Siren Timeout Programmable (3 min. by default), For Remote Keypad use only