User's Manual

42
This is designed for the system to check the SIM card or not. (If users do not intend to use
the GSM funciton, please tick “NO” to ensure the system will not check if the SIM card
is inserted or not and it will not display the GSM fault by LED flashing.)
Time Limit
By default, the system will shut down the GSM network after an hour, switching the network
connection to Ethernet. If the network connection of Ethernet is poor, the system will
automatically connect to GSM network again.
<NOTE>
 User who only uses GSM network can set the GSM connection time to No Limit.
GPRS
In order to allow GPRS to serve as a back-up IP Reporting method, this section will need to
be programmed before reporting.
 APN (Access Point) Name
It is the name of an access point for GPRS. Please inquire your service provider for an
APN. When APN is set, the system becomes valid for internet connection.
 User (GPRS)
It is the Log-in name to input before accessing the GPRS feature. Please inquire your
service provider.
 Password (GPRS)
It is the User Password to input before accessing the GPRS feature. Please inquire
your service provider.
<NOTE>
 All values will be applied to both Areas 1 & 2.
MMS
The MMS settings are offered by your telecom service provider. Before configuring this
function, contact your service provider for correct MMS setting information of the inserted SIM
card.
 APN (Access Point) Name
Enter a MMS APN name provided by your service provider.
 User
Enter the Log-in name for accessing the MMS feature provided by your telecom
service provider.
 Password
Enter the password for accessing the MMS feature provided by your telecom service
provider.
 URL
Enter the MMS APN URL provided by your telecom service provider.
 Proxy Address
Enter the MMS Proxy Address provided by your telecom service provider.
 Proxy Port
Enter the MMS Proxy Port provided by your telecom service provider.
SMS
 SMS Keyword