User's Manual

43
For sending remote commands to system via SMS message, a personalized password
is required for the Control Panel to recognize your authority.
 SMS P-Word
Program Keyword is used to recognize the identity of a valid user; and to give authority
for Remote Installing (through SMS Text) or Remote Upgrading purposes (through
GPRS). This keyword will need to be inserted whenever the Remote Setting or Remote
Upgrading is required. A maximum of 15 characters is allowed.
Two Way Setting
The two-way setting is designed to adjust speaker volume and microphone sensitivity on
DECT device for two-way communication.
WIFI Setting
The hotspot function allows you to share the panel's Internet connection with other connected
devices. The Wi-Fi setting allows you to enable or disable hotspot, configure the APN, SSID,
password and channel for the Wi-Fi network. Be noted that hotspot will be automatically
disabled when the AC power has failed, and it will be automatically enabled again when the AC
power recovers.
 Hotspot
Select from the dropdown list to enable or disable the hotspot function.
 APN (Access Point) Name
It is the name of an access point for Wi-Fi/GPRS. Please inquire your service provider
for an APN. When APN is set, the system becomes valid for internet connection.
 SSID (Service Set Identifier)
Enter the Wi-Fi network name to enable the function.
 Password
Enter the Wi-Fi password provided by your telecom service provider.
 Channel
Select the proper WiFi channel to improve your Wi-Fi coverage and performance.
<NOTE>
 If the Wifi APN is the same as the GPRS APN, the hotspot function will be temporarily
disabled when the panel connects to internet via GSM network.