User's Manual

 407 – Disarm/Away Arm/Home Arm by Remote Keypad
 408 – Set/Unset Arm/Disarm
 When the DC set at Set\Unset is triggered.
 456 - Partial Arm
 When partially arm the system from Disarm to Home arm
 570 – Device out of order/ Door Contact Not Closed
 When arm fault type is set as Direct Arm, any device is out of order after the preset exit
delay time is reached
 When arm fault type is set as Direct Arm, Door Contact is not closed after the preset
exit delay time is reached.
 602 – Periodic test report
 When the control panel makes periodic Check-in reporting.
 616 – Call Request
 When the service call is activated by VST-809.
 693 – Cross Zone First Trip
 When a sensor set to Cross Zone is triggered to start Cross Zone Timers.
 694 – Cross Zone Timeout
 When Cross Zone Timer expires after the alarm has been verified.
 695 – Fire Verification Timeout
 When Fire Verification Timer expires.
107