User's Manual

Caution:
 Wiring of the Hybrid Alarm System should only be performed by certified technician with
proper knowledge and training in electric equipment.
 Before installation or any maintenance work, make sure the power supply has been
disconnected.
 Do not connect the devices to loads exceeding supported load current.
 Do not connect the battery or the built-in power unit until all wiring is complete.
 The control panel enclosure must be secured to the wall before operation.
 Internal wiring must be routed in a manner that prevents:
- Wiring over circuit boards
- Excessive strain on wire and on terminal connections
- Loosening of terminal connections
- Damage of conductor insulation
 Incorrect connections will result in failure or improper operation. Inspect wiring and ensure
proper connections before applying power.
 Ensure to turn off all power supplies including Built-in Power Unit and SLA Battery
before connecting or removing cables or wires.
24