User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
3.4. Software Installation
※
THIS INSTALLATION IS ONLY REQUIRED FOR FIRST TIME USER
※
1. RUNNING THE FINDER SOFTWARE
The Finder software is required for your computer to identify the control panel on the LAN.
Step 1. To download Finder software, open your browser and type below URL in the address
bar: http://www.climax.com.tw/climax-download-finder.html
.
Step 2. After download, install the software and follow on-screen instructions to complete
installation.
Step 3. Follow on screen instruction to complete installation.
Step 4. Once complete, the Finder icon will be displayed on your desktop.
Step 5. Execute the Finder software. Finder will automatically search for control panel on the
LAN and display its information. If available, the panel’s LAN IP address, Firmware
version and MAC address will be displayed
25