User's Manual

Step 4. Click “Add” to include expansion board into panel.
Step 5. If expansion board is successfully learnt into the system, the added device will be
displayed in the “Learned Device” section.
<NOTE>
 For details on how to program wired zones, please refer to 5.12. Wired Zones
Programming.
5.2. Add RF Device
Besides learning, you can also add RF devices into the system by entering its RF code into the
system with Add RF Device function.
Step 1. Click Add RF Device.
Step 2. Select Area and Zone number for the device you wish to add into system.
Step 3. Enter the device RF code, and preferred device name (up to 31 characters)
36