User's Manual

Step 4. Press “OK” to save
Step 5. If the RF code you entered is valid, the device will be added into the system according
to the Area and Zone number. You do not need to learn the device as instructed in
5.1.1. Add Sensor.
5.3. Learn Rule
You can enter the sensor RF code MAC address manually to assign area and zone number to
this sensor. Sensors learned with pre-assigned rule will be put under the area and zone number
you specified. This function does not work with Shutter Control devices.
Step 1. Click Learn Rule.
Step 2. You will see the Add Learn Rule menu.
37