User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
5.6. Shutter Control Tool
The Shutter Control Tool is used to reset Shutter Control module to factory default and remove
all Shutter Control devices, or change routing setting.
Step 1. Click ”Shutter Control Factory Reset”, the Shutter Control module is reset to factory
default and all Shutter Control devices will be removed automatically. The Control
Panel Home ID will also be changed automatically for a newly added Shutter Control
device to recognize.
Step 2. The list of Shutter Control devices is still displayed in the Panel webpage. Please go to
panel webpage and remove all Shutter Control devices.
Change Shutter Control Routing Setting
Use the other functions to configure your Shutter Control routing settings.
41