User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
1.1 System Specifications
Functions
Number of areas 2
Number of on-board wired
zones
16 on-board zones, expandable to up to 64
1
zones in total
Number of total wired and
wireless zones
80 per area, 160 in total
Zone expansion module 8 wired zone expansion module (WEZC-8) available
Number of wired keypads
(KPT-35-COMBO)
32 (via RS-485 connection)
Number of users 80 per area, 160 in total
Wired input NO/NC
Single end-of-line (SEOL)
Double end-of-line (DEOL)
EOL resistance configuration (in ohms): 1K, 2.2K, 3.74K,
4.7K, 5.6K, 6.8K, 8.2K, 10K
(32 pieces of 5.6K resistors are included in shipment)
Ethernet interface RJ-45 connection
Electrical
Power supply
1
(1) 16 ~ 18VAC, 40VA, 50/60Hz
(2) 100 ~ 240VAC, 50/60Hz
Total current consumption of
hardwired zones, auxiliary
output, KPT-35-COMBO and
expansion module
12V/400mA (max.)
PGM & Bell total output 12V/400mA (max.)
Backup battery
2
options
(1) 12V/7A Sealed Lead Acid Battery (can be expanded up to
2 pieces)
(2) 12V/4A Sealed Lead Acid Battery (can be expanded up to
2 pieces)
Battery duration
(1) 12V/7A SLA: 36 hours
(2) 12V/4A SLA: 21 hours
1
Only one of these three options can be adopted at one time
2