User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
7. Network Settings
7.1. GSM
Check SIM
This is designed for the system to check if the SIM card is inserted or not. (If users do not
intend to use the GSM funciton, please tick “NO” to ensure the system will not check if
the SIM card is inserted or not and it will not display the GSM fault by LED flashing.)
Antenna
This option is for the user to choose between using the internal or external antenna.
GPRS
In order to allow GPRS to serve as a back-up IP Reporting method, this section will need to
64