User's Manual

be programmed before reporting.
 APN (Access Point) Name
It is the name of an access point for GPRS. Please inquire your service provider for an
APN. When APN is set, the system becomes valid for internet connection.
 User (GPRS)
It is the Log-in name to input before accessing the GPRS feature. Please inquire your
service provider.
 Password (GPRS)
It is the User Password to input before accessing the GPRS feature. Please inquire
your service provider.
<NOTE>
 All values will be applied to both Areas 1 & 2.
MMS
The MMS settings are offered by your telecom service provider. Before configuring this
function, contact your service provider for correct MMS setting information of the inserted SIM
card.
 APN (Access Point) Name
Enter a MMS APN name provided by your service provider.
 User
Enter the Log-in name for accessing the MMS feature provided by your telecom
service provider.
 Password
Enter the password for accessing the MMS feature provided by your telecom service
provider.
 URL
Enter the MMS APN URL provided by your telecom service provider.
 Proxy Address
Enter the MMS Proxy Address provided by your telecom service provider.
 Proxy Port
Enter the MMS Proxy Port provided by your telecom service provider.
SMS
 SMS Keyword
For sending remote commands to system via SMS message, a personalized password
is required for the Control Panel to recognize your authority.
 SMS P-Word
Program Keyword is used to recognize the identity of a valid user; and to give authority
for Remote Installing (through SMS Text) or Remote Upgrading purposes (through
GPRS). This keyword will need to be inserted whenever the Remote Setting or Remote
Upgrading is required. A maximum of 15 characters is allowed.
Two Way Setting
The two-way setting is designed to adjust speaker volume and microphone sensitivity on
device for two-way communication.
65