User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
8.10. Date & Time
Program the current Date & Time and set automatic synchronization with internet time server.
Date & Time: set current month, date and time.
Time Zone: choose your time zone, and then the system will calculate the daylight saving
time automatically (if necessary).
Internet Time: the system will automatically synchronize with an internet time server. Tick
the check box to enable this function. Available options: time1.google.com, pool.ntp.org,
time.nist.gov and tick.usno.navy.mil.
86