User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. System Settings
- 7. Network Settings
- 8. System Settings
- 8.1. Administrator Setting
- 8.2. Home Automation
- 8.3. Scene
- 8.4. Reporting
- 8.5. Code Settings
- 8.6. SMTP Setting
- 8.7. Media Upload
- 8.8. Polling
- 8.9. XMPP
- 8.10. Date & Time
- 8.11. Dynamic DNS
- 8.12. Test IP
- 8.13 Firmware Upgrade
- 8.14. RF Firmware Upgrade
- 8.15. IO MCU Firmware Upgrade
- 8.16. Factory Reset
- 8.17. Backup & Restore
- 8.18. System Log
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
8.15. IO MCU Firmware Upgrade
Step 1. Click “Firmware/IOMCU” to enter this page.
Step 2. Click on “Choose File” and locate the latest firmware file in your PC.
Step 3. Press “Apply” to upload the latest firmware to Control Panel
Step 4. Wait for 1 min and DO NOT power off during this time.
Step 5. Once Firmware upgrading is complete, the Panel will reboot automatically.
91