Parts List

 For the most desirable performance, remember to adjust the height of the Motion Sensor according to the height of the tallest
animal in the house. Taller animals require the sensor to be mounted higher for the Pet Immunity purpose.
 When deciding on the height of the sensor mounting site, remember to take any possible blind spot into consideration. The blind
spot underneath the sensor enlarges proportionally to the height of the mounting site.
 Please note that the performance is affected by external factors, such as height of detected object, desired detection range,
installation area, etc. The suggested mounting height could be adjusted according to actual installation environment factors.
 It is recommended to install the Motion Sensor in the following locations
 Mount where the animals cannot come to the detection area by climbing on furniture or other objects.
 Avoid aiming the sensor at stairways where the animals can climb on.
 Mount in a position such that an intruder would normally move across the sensor’s field of view.
 Mount in a corner to give the widest view.
 Mount where its field of view will not be obstructed e.g. by curtains, ornaments etc.
 Limitations
 Do not position a Motion Sensor to look directly at a door protected by a Door Contact, this could cause the Door Contact and
Motion Sensor radio signals to be transmitted at the same instant when entering, causing signal collision..
 Do not install the Motion Sensor completely exposed to direct sunlight.
 Avoid installing the Motion Sensor in areas where devices may cause rapid change of temperature in the detection area, i.e. air
conditioner, heaters, etc.
 Avoid large obstacles in the detection area.
 Do not aim the sensor directly at sources of heat e.g. fires or boilers, and not above radiators.
 Avoid moving objects in the detection area i.e. curtain, wall hanging etc.
4