User's Manual

ManualsBrandsClimax Technology ManualsElectronicsThermostatic Radiator Valve

TRV-1ZBS Thermostatic Radiator Valve

Introduction

TRV-1ZBS is a ZigBee Radiator Valve designed to control the surrounding temperature by controlling the flow of

hot water of radiators in the ZigBee network, i.e. indoor room temperatures.

The Radiator Valve utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless

communication protocol that is reliable and has low power consumption and high transmission efficiency. Based

on the IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network and

coordinated for data exchange and signal transmission.

The Radiator Valve serves as an end device in the ZigBee network. It can be included in the ZigBee network to

transmit signal upon activation, it can be controlled manually or remotely.

Parts Identification

1. Valve Cap

2. LCD Display

A. ON when device is already learned into Zig-Bee network.

B. Low Battery Indicator.

C. On: Device set to default temperature 17 °C.

Flash: Valve closing.

On: Device set to default temperature 21 °C.

Flash: Valve opening.

D. Auto / Manual Mode.

E. Boost function.

F. Open Window.

G. Temperature Indicator.

Others: InS: When power on device (also for learning period).

AdA: device motor working.

F1/F3: the valve is jammed, F2: no valve installed.

3. Function Buttons

-Manual/Auto: Enter Manual or Auto mode.

-Boost/ ZigBee: Speed up heating process/learn into ZigBee Network.

‐Press this button to instantly switch day and night temperatures.

Default day temperature: 21 °C, Default night temperature: 17 °C

4. Temperature Sensor

5. Control Knob

Adjust temperature manually.

6. Battery Compartment

The Radiator Valve is powered by two 1.5V AA alkaline batteries.

Summary of content (6 pages)

PAGE 1
TRV-1ZBS Thermostatic Radiator Valve Introduction TRV-1ZBS is a ZigBee Radiator Valve designed to control the surrounding temperature by controlling the flow of hot water of radiators in the ZigBee network, i.e. indoor room temperatures. The Radiator Valve utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless communication protocol that is reliable and has low power consumption and high transmission efficiency. Based on the IEEE802.15.
PAGE 2
Features  Power ON / Manual / Auto mode Power ON: When the Radiator Valve powers on, it’s motor starts working with LCD displaying InS, device is ready for installation and start learning process. (see Installation for details) Manual Mode: In the Manual mode, you can use the following functions: button: switch day/night temperatures instantly. - Boost button: Speed up heating, learning device into Control Panel.
PAGE 3
 Key Lock Function Press and hold both the Auto/Manual button and the If successful the LCD will display the button for 3 seconds to enable key lock function. symbol. All keys and Control Knob actions will not respond. If you wish to cancel key lock function, please press and hold both the Auto/Manual button and 3 seconds likewise.  button for Remote Control After the Radiator Valve joins a ZigBee network, you can control the Radiator Valve via ZigBee network coordinator or gateway.
PAGE 4
temperature 18.0°C, the installation is now complete. 8. After joining ZigBee network and completing installation, the ZigBee connection icon will appear on LCD display. 9. After joining the ZigBee network, if the Radiator Valve loses connection to current ZigBee network, the ZigBee connection icon will disappear after 10 minutes. Please check the ZigBee network condition and Radiator Valve signal range to correct the situation.
PAGE 5
/ Optional 0x0000 IdentifyTime  Unsigned 16-bit integer 0x00 –0xffff Name Type Range 0x0000 LOCAL_TEMPERATURE 16-bit 0x954d – 0x7fff 0x0003 MIN_HEAT_SETPOINT_LI 16-bit 0x954d – 0x7fff 0x0004 MAX_HEAT_SETPOINT_LI 16-bit 0x954d – 0x7fff 0x0005 MIN_COOL_SETPOINT_LI 16-bit 0x954d – 0x7fff 0x0006 MAX_COOL_SETPOINT_LI 16-bit 0x954d – 0x7fff 0x0011 OCCUPIED_COOLING_SE 0x0012 OCCUPIED_HEATING_SET 0x0019 MIN_SETPOINT_DEAD_BA 0x001B CTRL_SEQ_OF_OPER 0x001C SYSTEM MODE 0x0020 STA
PAGE 6
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.