User's Manual

VCM manual 2006.08.07

THE POWER SUPPLY

VCM is powered by an AC adaptor connecting to a wall socket. Be sure to use only an adaptor with the

appropriate AC voltage rating to prevent component damage. A DC 6V output and 2A adaptor is generally

used to power the VCM.

♦ APPLYING THE POWER ADAPTOR:

The power adaptor is applied to the VCM at factory before shipment. User is simply required to plug

in the adaptor to wall socket.

Step 1. From under the VCM, locate the AC adaptor connected to VCM.

Step 2. Plut the AC adaptor to wall socket.

♦ BACKUP BATTERY:

The VCM uses 1.5V x 4 alkaline batteries as its backup power source. The battery life lasts for

approximately 1 year before complete exhaustion.

<NOTE>

" The adaptor is used for daily operation, it provides power and at the same time charges the

battery. The rechargeable battery serves as a backup power source.

" The VCM can detect if the power is low. Low Battery status operates at a threshold of 5.6V.

The VCM will recognize Low Battery condition if the operating voltage <5.6V continues for 24

hours.

" In low battery status, a warning beep will be delivered every 45 secs until battery comes to

complete exhaustion.

INSTALLATION

Step 1. Fix bracket to the base of VCM and screw tightly.

Step 2. Position the bracket in alignment with pipe, then fasten them by using the screws, firmly but not

tightly so that they can still be moved or slided if necessary.

racket