Owner's manual
C M 6 0 0 0 C i r c u l a r M i l lC M 6 0 0 0 C i r c u l a r M i l l
B r i n g i n g t h e s o l u t i o n t o y o u .B r i n g i n g t h e s o l u t i o n t o y o u .
Portable, On-Site Machining Solutions
for Wind Tower Fabrication
Climax circular mills deliver fast,
versatile machining to meet
demanding wind tower specications
for connection anges.
Three-axis milling head adjustments
allow the machinist to meet taper
and atness specications
simultaneously. The Climax CM6000
mounts easily into tower sections in
production or in the eld, nished or
rough. With the CM6000, you deliver
accurate, precise tower sections,
ready to assemble at the job site.
Rapid Setup and Operation
• By bringing the tool to the tower
section, you get the job done fast.
• The Climax Portable Circular Mill
can cut machining time up to
75% compared to single-point
machining, especially on diameters
over 78 inches (1981.2 mm).
• Faster machining means 3-4
anges in a typical shift.
• Rigging system allows fast, easy
installation in horizontal or vertical
anges.
• Portable: circular mill disassembles
into manageable parts for ease of
transport and setup.
Powerful and Precise
• The Climax Portable Circular Mills
use large diameter precision
bearings and adjustable way radial
slides for the most rigid machining
platform available.
• Rotary Tables are manufactured to a
surface atness tolerance of 0.002
inches (0.051 mm), allowing the
machine to hold extremely tight
machining tolerances.