User's Manual

7

When an incoming call matches with any of
the programmed Caller ID(s), CTC-1052-
QT-DT35A will auto-answer the call without
checking access code or any button press.
 CTC-1052-QT-DT35A will match the
numbers starting from the last digit, and
verify 10 digits at the most.
For example, if a number string 321 is
programmed, CTC-1052-QT will instantly
pick up any call that has 321 as the last 3
digits.
If a number string 17605851848 is
programmed, CTC-1052-QT will instantly
pick up any call that has 7605851848 as the
last 10 digits. The first digit "1" of the Caller
ID will be ignored.
 Up to 20 digits are allowed for each Caller
ID.
Function
Selection
Result
(201-220)
Set Caller ID
(1
st
– 20
th
Caller ID)
 To set a Caller ID:
Step 1: Enter 00 + # on the phone set, then a
short beep will be heart via the
phone set.
Step 2: Enter the Caller ID Sequence (201-
220) followed by the * symbol, and
then the Caller ID, and the # symbol
at the end to terminate Function
Selection.
 Example: 201*27912518#
 201 represents it being the 1
st
Caller ID.
 27912518 represents the Caller ID
Step 3: A short beep will be heart via the
phone set if Function Selection is
successful.
Command 01-04
Telephone Number Programming
 Used to program the 1
st
- 4
th
Tel. numbers
respectively.
 To program the 1
st
Tel. number: enter (01)
followed by (#). After one short beep, enter
(telephone number) followed by (#).You
can hear one beep from the telephone
speaker that indicates the programming is
successful.
If you hear CTC-1052-QT-DT35A emit one
beep instead, that means the programming
of the 1
st
telephone number has failed.
Please repeat the programming steps
again.
 Likewise, the 2
nd
, 3
rd
or 4
th
Tel. numbers can
be programmed using Command (02), (03)
or (04) respectively.
<NOTE>
 When entering the phone number,
entering () means a 3-second pause.
(e.g. Switchboard system, extension,
etc.). For example, the phone number
is 21111111 and extension number is
255. Enter: 21111111*255.
 Up to 20 digits including () are
allowed for each telephone number.
 The 1
st
, 2
nd
, 3
rd
, and 4
th
Tel. numbers will be
used as primary medical alarm number,
secondary medical alarm number, primary
fire/CO2 alarm number, and secondary
fire/CO2 alarm number, respectively.
Delete Telephone Number：
 To delete the 1
st
Tel. number, enter (01)
followed by (#), after one short beep, enter
another (#). You can hear one beep from
the telephone speaker that indicates the
telephone number has been successfully
deleted.
If you hear CTC-1052-QT-DT35A emit one
beep instead, that means you have failed to
delete the telephone number. Please repeat
the deleting steps again.
 Likewise, you can erase the respective 2
nd
,
3
rd
or 4
th
Tel. Numbers, by following the
above procedure.
Command 05-06
Select Telephone Number for Alarm
Reporting and Status Reporting
<IMPORTANT NOTE>
If the Tel. number is selected in
Commands #5, #6 and #7, then
Command #7 holds the top priority to