User's Manual

17
 Learning can only be completed
within the signal reception range of
CTC-1052-QT-DT35A.
 If no signal is received within 20
sec, CTC-1052-QT-DT35A will emit
a long beep and automatically
return to Programming mode.
Step 3: CTC-1052-QT-DT35A will emit 2
beeps to indicate the device is
learnt-in successfully.
 Adding a device for a second time is
prohibited unless it is removed from
the system first.
 If one long beep is emitted instead
of 2 beeps, it indicates:
 The device has already been
learnt-in.
 When the 21
st
device is attempted
to learn-in.
Step 4: Repeat steps 1-3 until all devices
are learnt-in.
Command 98
Factory Default Reset
 To Reset CTC-1052-QT-DT35A to factory
default settings, enter (98) and then (#).
 After one short beep, continue by entering
() and then end with another (#), one
beep will be heard for termination.
 Once the Factory Default Reset is
executed, all the programmed data is
returned to its default value and all the
devices that have been learnt-in are
removed. You have to do the programming
and learn-in the device one by one again.
Command 99
Exit Programming Mode
 Enter (99) and (#), after one short beep,
CTC-1052-QT-DT35A exits the
Programming Mode and returns to idle
mode.
4.3. SMS Remote
Programming
CTC-1052-QT-DT35A can be remotely
programmed via SMS commands.
<NOTE>
 Prior to procced, please be reminded to
change the language setting of your mobile
phone to English.
Step 1: Use your handset and go into the SMS
edit screen.
Step 2: Enter the SMS keyword (default is
PROG).
Step 3: Enter a space.
Step 4: Enter the access code (default is 8744
as defined by Command 40).
Step 5: Enter a space.
Step 6: Enter the programming command.
Step 7: Editing is complete; you may send to the
Control Panel.
<EXAMPLE>
<NOTE>
 For a complete list of SMS commands,
please refer to section 4.3.1 CTC-1052-
QT-DT35A SMS Remote
Programming Command Table.
E.g. PROG_8744_TEL1:0227940001
PROG

SMS Keyword
__

Space
8744

Access Code
__

Space
TEL1

Telephone number 1
：

Colon
0227940001

Programming
data/option