Installation Instructions
Table Of Contents
- 1. Introduction
- 2. System Overview
- 3. Getting Started – Setting up Mobile Lite
- 4. Programming Mobile Lite
- 5. Local RF Device Management
- 6. Operation
- 7. Appendix
- I. Federal Communication Commission Interference Statement
JSON udi: Please input the device UDI (Unique Device Identifier) for
JSON Report. Maximum of 15 numeric characters or alphanumeric letters.
Speech reporting and SMS Text Report Format: PhoneNumber
Example: 0912345678
Speech Reporting: When activated, Mobile Lite will dial to the telephone
number and open two-way voice communication directly.
Speech reporting is for Emergency Event only. Status event will not
be sent via speech.
Please note that Location info cannot be sent via Speech.
It is recommended to program at least one IP report before a Speech
Report. The IP and speech reports each should be assigned to a
separate Group. During two-way communication, Mobile Lite location
info will be updated every minute, and at the same time reported via
the last successful IP channel. (refer to 6.5. Alarm Activation for
more details).
SMS Text Reporting: When activated, Mobile Lite sends a SMS text
message to the recipient. The message contains event information and a
Google Map link for location. If the recipient’s receiver device supports
map function, he/she can click on the link to locate Mobile Lite.
Event Filter
This parameter determines which events are reported to the selected Report
Destination.
3 options: “All”, “Emergency” and “Status”. When an event is triggered, it will
be reported to the reporting destination according to the setting. If set to All,
the panel will report all events regardless of event type.
For example:
Mobile Lite being low on battery is a “status” event. If report index 3 and 5
are set as “status” and index 4 as “all” in event filters, this status event will
be reported to destinations 3, 4, and 5.
For more information, refer to 8. Appendix for event code types.
Reporting Format (Type)
The available reporting formats include:
JSON: The default IP report format for Mobile Lite R32.
Speech: Mobile Lite reports over the Speech channel to allow the user to
talk directly to the call recipient.
SMS TEXT: Mobile Lite sends a SMS text message containing event
14