Climax Gate Valve Grinding & Lapping Machines Model Numbers VM1150, VM1200 Valve Seat Diameter Range: 1.25”-8.0” (32mm-200mm) “On Site” grinding and lapping of gate valves Easy to set up and handle Powerful Rigid design High performance Mrz-06 / VM1150-1200 Gate Valve Grinding & Lapping Machine Brochure.doc Page 1 of 9 Climax Portable Machine Tools 2712 E. Second St. Newberg, OR 97132 USA Telephone: 503-538-2185 North America Toll-Free: 800-333-8311 E-Mail: info@cpmt.com Internet: www.cpmt.
Models VM1150, VM1200 Quick Coupling for Changing the Motor Gear Box Motor (Electric or Pneumatic) Machine arm Swivel adapter Maximum submerging depth: 16” (406 mm) (Standard) 18” (450 mm) (Option) Solid grinding disk range 1.25“ to 3.0“ (32 mm to 80 mm) diameter Grinding spindle with self aligning coupling Minimum distance between seats: 1.
Technical Data Working range DN… Submerging depth Power Variable Spindle Speed Spindle Torque min 1.25“ 32 mm max 8“ 200 mm max 16” 400 mm optional 18“ 450 mm electric 0.75 HP(0.55 kW) pneumatic 0.75 HP(0.55 kW) electric 100 … 550 Rev/min pneumatic 100 … 650 Rev/min permanent 5.3 ft-lbs (7.2 Nm) 29.5 ft-lbs (40.
Model VM1150 (Range: 1.25”-6.0” (32 mm-150 mm) Diameter P/N Description 420-00S-S12 Gate Valve Grinder VM1150S Nominal working diameter 1.25“ to 6“ (32 mm to 150 mm) Submerging depth 16“ (400 mm). Included Components:: • 7 piece solid grinding disk set 2.0”(50 mm), 2.2”(55 mm), 2.4”(60 mm), 2.6”(65 mm), 2.9” (73 mm), 3.2”(80 mm) and 3.4”(85 mm) diameters. • 1 set (5) of planet arms 1.2”(30 mm) in length. • Set of 2 planet wheels 3.9”(100 mm), 5.3” (135 mm) diameters. • 1 set (5) of grinding discs 2.
Model VM1200 (Range: 1.25”-8.0” (32 mm-200 mm) Diameter VM1200S with electric motor P/N Description 420-00S-S32 Gate Valve Grinder VM1200S Nominal working dia 1.25“ to 8“ (32 mm to 200 mm) Submerging depth 16“(400 mm). Included Components: • 7 piece solid grinding disk set 2.0”(50 mm), 2.2”(55 mm), 2.4”(60 mm), 2.6”(65 mm), 2.9” (73 mm), 3.2”(80 mm) and 3.4”(85 mm) diameters. • Set of 2 planet arms 1.2”(30 mm) and 2.6”(65 mm) in length. • Set of 2 planet wheels 3.9”(100 mm), 5.3” (135 mm) diameters.
Accessories P/N 240-13K-001 Description Maintenance unit for pneumatic motor Required for machines with pneumatic motor. The maintenance unit is not included in the standard scope of supply with pneumatic driven machines. Includes: • filter • oiler • pressure gauge • speed controller 420-00S-L03 Swing Check accessories For grinding of swing check valves. Includes: • Swivel adapter for adaption of the machine on the valve • Spindle extension for reaching the seat with the planet wheels.
Accessories P/N 185-00S-S22 185-00S-S23 110-51S-N01 110-52S-N01 110-50S-L01 110-61S-N01 110-62S-N01 110-60S-L01 Description Grinding adapter For using the tooling of the VM1150(S) on stationary drill presses. The grinding pressure is made by an application of springs. The scale for the grinding pressure is divided into two ranges: One for high rate of removal of material and the other for high precision surfaces. Grinding adapter MT2 For using on stationary drill presses with morse taper #2.
Accessories P/N Description 220-00S-L12 Globe Valve Extension Kit The extension kit comes with a complete machine arm including the drive motor and a mounting column. It uses the tooling of the VM1150/1200. Included Components: • One pieces of ball joint coupling size 10 and 15 each. • Integrated grinding pressure detection with a scale. • Mounting column with mounting plate for valves with and without flange. • Carrying cases with foam inlet for the machine and the accessories.
TWIN Machines for Gate and Globe Valves (Range: 1.25”-8.
