Climax Gate Valve Grinding and Lapping Machines Model Numbers: VM1350, VM1500, VM1600 Valve Seat Diameter Range:1.5“-24“ (40 mm-600 mm) “On Site” grinding and lapping of gate valves Easy to set up and handle Powerful Rigid design High performance Feb-10 / VM1350-1600 Gate Valve Grinding & Lapping Machine Brochure.doc Climax Portable Machine Tools 2712 E. Second St. Newberg, OR 97132 USA Telephone: 503-538-2185 North America Toll-Free: 800-333-8311 E-Mail: info@cpmt.com Internet: www.cpmt.
Models VM1350, VM1500, VM1600 Overview (Seat Ranges: 1.5”-24”(40 mm-600 mm) Quick coupling for changing the motor Gear box Motor (Electric and/or Pneumatic) Machine arm Swivel adapter Max submerging depth: 24” (600 mm) (VM1350) 31” (800 mm) (VM1500) 39” (1000 mm) (VM1600) Submerging depth Solid grinding disk range 1.25“-3.0“ (32 mm-80 mm) diameter Minimum distance between seats: 1.
Technical Data Working range-DN… Submerging Depth Power min 1.5’’ 40 mm max (VM1350) 14’’ 350 mm max (VM1500) 20’’ 500 mm max (VM1600) 24” 600 mm max (VM1350) 24” 600 mm max (VM1500) 31’’ 800 mm max (VM1600) 39“ 1000 mm 1.3 HP 1 kW 0.75 HP 0.
Model VM1350 (Range 1.5”-14” (40 mm-350 mm)Diameter) P/N 440-00S-S12 Description Gate Valve Grinder VM1350S Nominal working dia 1.5“ to 14“ (40 mm to 350 mm) Submerging depth 24“(600 mm). Included Components: Set of 3 solid grinding disc s 2.2”(55 mm), 2.6”(65 mm), 3.4”(85 mm) diameters. 3 sets (5 arms/set) of planet arms 1.2” (30 mm), 2.4” (60 mm), 4.5”(115 mm) in length. A set of 3 planet wheels 3.9”(100 mm), 5.3”(135 mm), 8.7”( 220 mm) in diameter. 1 set (5) of grinding discs 2.
Model VM1500 (Range 3”-20” (80 mm-500 mm)Diameter) P/N 440-00S-S32 Description Gate Valve Grinder VM1500S Nominal working dia 3“ to 20“ (80 mm to 500 mm) Submerging depth 31“(800 mm). Included Components: 3 sets (5 arms/set) of planet arms 1.2” (30 mm), 2.4” (60 mm), 4.5” (115 mm) in length. A set of 4 planet wheels 3.9”(100 mm), 5.3”(135 mm), 8.7”( 220 mm) 15.0”(380 mm) in diameter. 2 sets (5 discs/set) of grinding discs 2.0”(50 mm) & 3.2” (80 mm) in diameter.
Model VM1600 (Range 3”-24” (80 mm-600 mm)Diameter) P/N 440-00S-S52 Description Gate Valve Grinder VM1600S Nominal working dia 3“ to 24“ (80 mm to 600 mm) Submerging depth 40“(1000 mm). Scope of supply: 4 sets (5 arms/set) of planet arms 1.2” (30 mm), 2.4” (60 mm), 4.5” (115 mm), 7.3”(185 mm) in length. A set of 4 planet wheels 3.9”(100 mm), 5.3”(135 mm), 8.7”( 220 mm) 15.0”(380 mm) in diameter. 2 sets (5 discs/set) of grinding discs 2.0”(50 mm) & 3.2” (80 mm) in diameter.
Accessories P/N 240-13K-001 Description Maintenance unit for pneumatic motor Required for machines with pneumatic motor. The maintenance unit is not included in the standard scope of supply with pneumatic driven machines. Includes: filter oiler pressure gauge speed controller 440-52T-008 Setup adapter for flanges with threaded studs (2 pcs.) Enables the set up of the machine without removing the threaded studs of the flange. Are used instead of the clamping pads.
Accessories P/N 240-66S-N01 Description Extension Kit 20” (500 mm) for grinding To extend the working range of the VM1350 to 20” (500 mm). 1 planet wheel 15.0” (380 mm) diameter. 1 set (5) grinding disk 3.2”(80 mm) diameter. 1 start up set abrasives 3.2”(80 mm) diameter: grain 100 and 500. 240-67S-N01 Extension Kit 20” (500 mm) for grinding and lapping To extend the working range of the VM1350 to 20” (500 mm). 1 planet wheel 15.0” (380 mm) diameter. 1 set (5) grinding disk 3.2”(80 mm) diameter.
Accessories P/N 185-00S-S22 Description Grinding adapter For using the tooling of the VM1000 series on stationary drill presses. The grinding pressure is made by an application of springs. The scale for the grinding pressure is divided into two ranges: One for high rate of removal of material and the other for high precision surfaces. Grinding adapter MT2 For using on stationary drill presses with morse taper #2. 185-00S-S23 Grinding adapter MT3 For using on stationary drill presses with morse taper #3.
Accessories P/N 110-51S-N01 110-52S-N01 110-50S-L01 Description Planet Arms 3 degree The spindles of these arms are designed with a 3 degree offset. These arms are made to rework the 3 degree relief angle in gate valves Planet arm #II 3 degrees (2.4”(60 mm) length) (each) (A total of five required) Outside grinding diameter 6.3”-13.0”(160-330 mm) (diameter depends on selected planet wheel) Planet arm #III 3 degrees (4.5”(115 mm) length) (each) (A total of five required) Outside grinding diameter 13.
