Operation Manual

ManualsBrandsClimsom ManualsMiscellaneousTopper

USER MANUAL FOR CLIMSOM,

THE WARMING AND COOLING

MATTRESS TOPPER

Please read carefully before use

Recommendations and troubleshooting

2 - Troubleshooting

Troubles Answers

Your CLIMSOM does

not start.

Check that you have plugged the CLIMSOM in and

that your electricity supply is working well.

Check that the water alarm indicator is not on. If it is,

add water.

If all lights on the thermocontroller board are on,

unplug the thermocontroller, and then plug it back in.

The temperature is not

the one you want.

Make sure that you have pressed the Enter button to

confirm your choice.

Check that the water alarm indicator is not on. If it is,

add water.

Check that the fan protector and the air openings of

the thermocontroller are not covered with dust or

objects. If needed, clean them.

- NEO FACORY declares that this CLIMSOM device satisfies the European

Directives 2006/95/EC, 2004/108/EC, 1999/5/EC (DoC - www.climsom.com),

2002/95/EC and 2002/96/EC.

- Make sure that the voltage of the power socket is the same as the one indicated

in this manual.

- Never put the device into water.

- To unplug the device, never pull on the cord.

- This device should not be used if the device or its electrical cable shows

defaults or abnormalities.

- Keep and use your CLIMSOM in a dry, clean place.

- When working, your CLIMSOM should lie on a flat surface.

- Make sure that the fan and the air openings are free. Never cover your CLIM-

SOM.

- Immediately stop using your CLIMSOM and unplug it in the event of one the fol-

lowing situations: a fuse burnt more than once, strange sounds or odors, external

materials inside the thermocontroller or the mattress topper.

- Do not bend the connecting pipe between the thermocontroller and the mattress

topper.

- Do not cut through the mattress topper as you could cut through one of its water

tubes.

- Do not let children use CLIMSOM without adult supervision.

- CLIMSOM – Neo Factory cannot be held responsible for any possible damage

that occurs due to an unproper or unindicated use of CLIMSOM.

- At the end of the lifespan of the product, dispose of it in a appropriate way.

1 - Recommendations and security warnings

Summary of content (6 pages)

PAGE 1
Recommendations and troubleshooting 1 - Recommendations and security warnings - NEO FACORY declares that this CLIMSOM device satisfies the European Directives 2006/95/EC, 2004/108/EC, 1999/5/EC (DoC - www.climsom.com), 2002/95/EC and 2002/96/EC. - Make sure that the voltage of the power socket is the same as the one indicated in this manual. - Never put the device into water. - To unplug the device, never pull on the cord.
PAGE 2
Index 4 - Empty the water out of the thermocontroller & the mattress topper Quick start in four easy steps.................... Advanced use and remote.......................... Maintenance and cleaning ......................... Recommendations and troubleshooting...
PAGE 3
Maintenance and cleaning 1 - Not enough water in the water tank of the thermocontroller If this indicator light turns on in the thermocontroller board, add water to the water tank (see “Quick Start,” and go directly to step C) You will refill the water in the tank somewhat frequently. 2 - Cleaning the thermocontroller Congratulations on purchasing your CLIMSOM! CLIMSOM will transform the way you sleep and rest.
PAGE 4
3 - Timer and 31-36°C modes GUARANTEE Nature of the guarantee Your CLIMSOM is supplied with a manufacturer's guarantee that covers any manufacturing defect. Only the shipping of the product by the customer at NEO FACTORY is the responsibility the customer. Its duration is 2 years from the delivery date of the product.
PAGE 5
Advanced use and Remote Quick start in four simple steps 1 - Thermocontroller board 1 - Set up the mattress topper and thermocontroller (a) Nozzle (female) Pillow (b) Mattress Topper Nozzle (male) a) Put the mattress topper under the sheets or the mattress protector. b) Put the thermocontroller near the bed.
PAGE 6
3 - Fill the thermocontroller and the mattress topper with water 4 - Choose the sleep temperature a) Plug the thermocontroller into an electrical outlet a) Take note if the temperature displayed is in Celsius or Fahrenheit. To select one or the other, press the button labeled “°f/°c” on the thermocontroller board. b) Open the water tank of the thermocontroller, and fill it with water. Use a glass, bottle, or pourer.