Specifications

*DEFAULT PORT IS 80!!

WAN (World Area Network)

1) Enter IP Gateway address to DVR TCP-IP setup.

2) User may change connection speed to 512K, to reduce image data on slower

networks. Network traffic jams, always make data transfer slow, this is

normal.

3) After DVR TCP-IP setup, install the remote viewer to computer.

*See the remote viewer page

-Port is 0080 normally, may be different, depending on network company area.

PASSWORD SETUP

a. LEVEL (Log In level ID type setup) >NONE / ADMIN / USER

*NONE: user does not need to insert password before entering MENU

b. ADMIN password > 44444 (factory default)

c. USER password > 11111 (factory default)

**NOTICE: Password must be 5 (five) characters ONLY!