Order Number : GETEC-C1-09-037 FCC Part 15 Subpart C Test Report Number : GETEC-E3-09-020 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: Phone Adapter FCC ID.
INSTALLATION GUIDE ConnectLine Phone adapter Getting started
PURPOSE OF THIS GUIDE READ THIS FIRST Before your hearing instruments can be used for conversations over your land line phone, the Phone adapter must be connected to the phone line and a power outlet. This is an easy step-by-step guide through the installation of the Phone adapter. All needed parts for the installation are included in the package. The connection parts are packed in two numbered boxes.
PHONE ADAPTER OVERVIEW Back Phone button Phone connection Front Land line connection Power connection 4 STATUS INDICATOR Light Constant Slow fading Blinking No light Meaning Streamer connected Searching for Streamer Pairing Off 5
CONNECTING TO POWER Begin the installation by connecting the Phone adapter to a power outlet. Use the Power adapter from box no. 1. - Plug the power adapter into the wall socket or another power source. - Plug the power cord into the power connection. - Check that power is turned on. After a few seconds the status indicator gives a slow fading red light.
CONNECTING TO PHONE LINE Connect the Phone adapter to the phone line and phone. Use the Tele cord from box no. 2. (The connector plugs are the same in both ends of the Tele cord) First, the existing land line connection between the wall outlet and your phone (or base station) must be disconnected at the phone end: 1. Unplug the phone line from the phone (or base station). * 2. Plug the phone line in the Phone adapter “LINE” connector (BLACK). 3.
PREPARE STREAMER TIPS AND SUPPORT The very first time your Streamer is used with the TeleAdpater, the two devices must be paired together. PAIRING: 1. In order to prepare the Phone adapter and Streamer as a pair, both devices are placed close to each other and pairing mode is activated. 2. Press Streamer Connect button for 5 seconds until the blue light starts flashing rapidly. 3. Press the red Phone button on the Phone adapter for 5 seconds until the red status indicator blinks.
PRODUCT APPROVAL PRECAUTIONS AND MARKINGS This device complies with Part 15 of the FCC Rules. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. CAUTION: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNINGS Oticon hereby declares that this Phone adapter, is in compliance with the essential requirements and other relevantprovisions of Directive 1999/5/EC. Declaration of conformity is available at: Oticon A/S Kongebakken 9 DK-2765 Smørum Denmark www.oticon.com If a part is swallowed, see a doctor immediately. Waste from electronic equipment must be handled according to local regulations.
908 69 610 00 / 02.
