User's Manual

The Phone adapter is not a toy and therefore should be kept out of the reach of children and anyone else who
might swallow parts or otherwise cause injury to themselves. Special attention should be paid to the smaller
components in order to prevent children from swallowing them and choking.
If a part is swallowed, see a doctor immediately.
The safety of the use of the Phone adapter with an auxiliary input cable is determined by external signal
source. When the input cable is connected to mains operated equipment, this equipment must comply with
IEC-60065, IEC-60601 or equivalent safety standards.
The Phone adapter is designed to comply with the most stringent Standards of International Electromagnetic
Compatibility. However, the Phone adapter might cause interference with other medical devices. Please con-
tact relevant personnel to obtain a permission before using the Phone adapter in hospitals or similar venues.
WARNINGS
Oticon hereby declares that this Phone adapter, is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Declaration of conformity is available at:
Oticon A/S
Kongebakken 9
DK-2765 Smørum
Denmark
www.oticon.com
Manufacturer : Clipcomm Inc.
Model No. : BS-H100
Use the following switch mode power supply with your Phone adapter: Sunlin Electronics,
Input: 100-240V AC 150mA 50-60Hz, Out put 5.1V DC 700mA
Waste from electronic
equipment must be
handled according to
local regulations.