01 Quick Start Guide: 1
Contents CHAPTER1. HOW TO INSTALL BS-A101 .............................................................................. 3 1.1. BS-A101 INSTALLATION.............................................................................................. 3 1.2. BS-A101 NETWORK CONFIGURATION ..................................................................... 3 CHAPTER2. HOW TO USE BLUETOOTH LAN ACCESS FUNCTION (POCKET PC 2000 USERS ONLY) ................................................................................
Chapter1. How to Install BS-A101 BS-A101 has VoIP Phone / Bluetooth LAP / Bluetooth CTP Gateway / Bluetooth Headset Audio Gateway functions. This quick start guide explains how to install BS-A101 and how to use each functions of the BS-A101 with PocketPC program. In this guide, it is assumed that the BS-A101 is in its factory-reset state. 1.1.
Chapter2. How to Use Bluetooth LAN Access Function (Pocket PC 2000 users only) This chapter explains how to use the Bluetooth LAP function of the BS-A101 with PocketPC Bluetooth LAP program. In this guide, it is assumed that the BS-A101 is in its factory-reset state. 2.1. PocketPC LAP Program Installation ① PocketPC2000 with ActiveSync on the Desktop. ② Execute “BTSetup.exe” 2.2.
2.3.
③ Try to connect ④ Open “Search NeighborHood” window ⑤ Search the Bluetooth device by “Inquiry” button ⑥ Select Bluetooth device by inquiry list ⑦ Click “Connect” button ⑧ When “Connected” window pops up, you can use the internet.
Chapter3. How to Use Bluetooth CTP Gateway Function This chaper explains how to use the Bluetooth CTP Gateway function of the BS-A101. In this guide, it is assumed that the BS-A101 is in its factory-reset state. For more details of VoIP Phone function of the BS-A101, please refer to the CP-101B user manual. 3.1. BS-A101 VoIP (H.323) Setting IP to IP call mode is supported as default.
3.3. BS-A101 & Phonizer Operation Phonizer is a Bluetooth CTP terminal while BS-A101 is a Bluetooth CTP gateway. Phonizer can make calls to (or accepts calls from) outer network through BS-A101. 3.3.1. Preparation To make calls, Phonizer should find a BS-A101 and be in the connected state. ① Click ‘Inquiry’ button of Phonizer to find all the compatible devices ② Among the neighboring Bluetooth devices in inquiry window, select BS-A101 pushing ‘Connect’ button.
[Important Check Points before Phonizer-CFA evaluation] The following items must be checked before starting Phonizer-CFA evaluation. ① Remove the power cable from your PDA and make it sure that the PDA is off the cradle before the calling test. ② When the power is being fed to the PDA, the voice quality may be degraded due to 60Hz humming noise. ③ Ensure that the remained battery power level is over 80% during the call test.
Chapter4. How to Use Bluetooth Headset Audio Gateway Function This chapter explains how to use the Bluetooth Headset Audio Gateway function of the BSA101. In this guide, it is assumed that the BS-A101 is in its factory-reset state. For more details of the VoIP Phone function of the BS-A101, please refer to the CP-101B user’s manual. 4.1. BS-A101 VoIP (H.323) Setting IP to IP call mode is supported as default.
4.2.2. Usage of Your Headset after Registration 1) Receiving Incoming Calls When an incoming call arrives at your BS-A101, your headset also rings. You can receive the call by pressing a relevant button on your headset. 2) Placing Outgoing Calls When you want to place an outgoing call using your headset, you can only make a phone call to the latest placed number by pressing a relevant button on your headset.
