Manual

360°x6

Fix the wall-cups ‘C’ to the wall using appropriate fixings depending on the wall surface:

Wood screws for wooden surfaces, appropriate wall plugs and screws for concrete / brick /

plaster walls, or metal screws for metal surfaces. These screws are not provided.

Use Size 6 (3.5mm diameter) flat head counter sunk screws of minimum length 25mm.

Repeat Step 5 on the opposite wall surface.

6. Place the gate into the opening, making sure that the pedal touches the floor. Adjust the

spindles equally on the corners of the gate so that they are each touching the wall. Remove the

gate and on one side of the gate, turn both spindles six times counter-clockwise.

7. Place the gate into the opening . Before applying the pressure, check that the pressure

indicators on the top corners of the gate are between the two markers.