Manual

Fitting a 7cm Extension
Remove the screw adjusters ‘A’, nuts ‘B’ and the casings ‘C’ from the hinge
side of the gate (1). Turn the screw adjuster casings ‘C’ upside down and
re-insert them into the frame (2). They should extend slightly from the
frame. Attach the extension ‘F’ onto the casings (3). Fasten the screw
adjusters ‘A’ and nuts ‘B’ into the extension ‘F’ (4).
G
1
C
A
B
C
A
B
2 3
F
4
Fitting a 14cm Extension
H
Remove the screw adjusters ‘A’, nuts ‘B’ and the casings ‘C’ from the hinge
side of the gate (1). Place the long end of the extension ‘I’ directly into the
frame making sure that the notches are facing downwards (2). Attach the
extension ‘F’ to the short end of the extension ‘I’ (3). Fasten the screw
adjusters ‘A’ and nuts ‘B’ into the extension ‘F’ (4).
1
C
A
B
C
A
B
2
I
3
F
4