ClippperCreek HCS Series Manual

HCS User Manual

ILLUSTRATIONS

Figures

1. HCS Front Panel ............................................................................................16

2. 220/240V Single Phase .................................................................................21

3. 208V 3-Phase, Wye-Connected .....................................................................21

4. 240V 3-Phase, Delta-Connected, with Center-Tap on One Leg....................22

5. Mounting the HCS to a Hollow-Wall ............................................................26

6. Mounting the HCS to a Solid-Wall ...............................................................27

7. Mounting the SAE J1772 Connector Holster Using the Exterior

Wood Screws and Washers ............................................................................29

8. Drape the Charge Cable Loosely Around the HCS Enclosure ...................... 30

9. Wiring the HCS in a Junction Box ................................................................ 31

10. Preferred Orientation of the NEMA Receptacles Below the Plug-in HCS ...33

11. Locking the SAE J1772 Connector with Padlock Included .......................... 35

12. Charge Connector Secured with Padlock which Cannot be Removed

from Vehicle without Key .............................................................................35

13. Padlock Used in Combination with Connector Holster After Charging .......35

14. HCS Enclosure Dimensions ..........................................................................41

Tables

1. Front Panel LED Information........................................................................16

2. Service Connections for Standard & Ruggedized HCS ................................17