Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
![](/manual/clipsal/5000ctc3-series/1-specifications-english/images/img-9.png)
C-Touch Colour Touch Screen
10
70° down
70° left
70° right
40° up
Figure 3 – Consider the C-Touch Colour's viewing angle when mounting the unit
5.2 Multiple C-Touch Units
Multiple C-Touch units can be installed on a C-Bus network. These units
may be programmed to operate cooperatively or independently of each
other. Take care not to mount units where a single IR remote control
transmission can be received by multiple units (illustrated in
Figure 4).
Otherwise, multiple units may trigger a scene, with unpredictable results.
Poor
p
lacement
remote
5000CT
5000CT
Good
p
lacement
remote
5000CT
5000CT
Figure 4 – Take care not to overlap IR transmission/reception zones