Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
Installation Instructions
11
6.0 Mounting Instructions
There are two options for mounting the C-Touch Colour. These are:
• in stud walls (such as timber frame internal walls) using a nail
bracket
• in solid walls (such as brick or stone) or stud walls using a wall box.
6.1 Nail Bracket
The C-Touch Colour Nail Bracket (part number 5000CTCNA) provides a
convenient means of mounting the C-Touch Colour unit. The nail bracket
(illustrated in
Figure 5) is used where is it practical to nail or screw the nail
bracket into a wall frame.
Figure 5 – A C-Touch Colour Nail Bracket