Specifications

C-Touch Colour Touch Screen
14
6.2 Wall Box
The C-Touch Colour Wall Box (part number 5000CTCWB) allows the
C-Touch Colour unit to be mounted within a solid wall construction such as
brick or stone. It provides increased RF shielding compared to the Nail
Bracket. The wall box (illustrated in
Figure 7) may also be used to mount a
C-Touch Colour unit in timber or metal framed stud walls.
Figure 7 – A C-Touch Colour Wall Box
To mount the C-Touch Colour using the wall box:
1) Prepare a hole in the wall or place the wall box against a beam of
the wall frame (in stud walls).
2) Fix the wall box into the frame, in an appropriate manner.
3) Feed the cables through to the wall box. It is recommended that
conduit be used. Refer to
Figure 8. The number and positioning of
cables will vary depending on the particular installation. Possible
cables are listed in
Table 1.
4) Hold the C-Touch Colour unit up to the wall box and plug the
cables into the connectors.
5) Insert the unit into the wall box, lining the mounting holes up with
those in the wall box. Fix the C-Touch Colour to the wall box using
the four screws provided. Do not over tighten. Ensure cables are
clear of mounting screws.