Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
Installation Instructions
15
Figure 8 – Installing the C-Touch Colour Wall Box
6.3 The Power Supply Unit
It is recommended that the 5000CTCPS Power Supply be mounted above
the C-Touch Colour unit in the ceiling space. Note the following important
points:
• Do not cover the power supply unit or sandwich it between
cavities or insulation.
• Feed the DC output cable down to the C-Touch Colour unit
through conduit. This simplifies the process of replacing the power
supply unit, should this ever be necessary.
• A mains power outlet is required for the power supply unit to plug
into.
• Do not replace, extend or shorten the Power Supply’s DC output
cable. Doing so may result in damage to the C-Touch Colour or
Power Supply unit, and void the warranty.