Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
© Copyright Clipsal Integrated Systems Pty Ltd 2005. All rights Reserved. This
material is copyright under Australian and international laws. Except as permitted
under the relevant law, no part of this work may be reproduced by any process
without prior written permission of and acknowledgement to Clipsal Integrated
Systems Pty Ltd.
Clipsal and C-Bus are registered trademarks of Clipsal Australia Pty Ltd.
The information in this manual is provided in good faith. Whilst Clipsal Integrated
Systems (CIS) has endeavoured to ensure the relevance and accuracy of the
information, it assumes no responsibility for any loss incurred as a result of its use.
CIS does not warrant that the information is fit for any particular purpose, nor does
it endorse its use in applications which are critical to the health or life of any
human being. CIS reserves the right to update the information at any time without
notice.
V1.0a Mar 2005