Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
![](/manual/clipsal/5000ctc3-series/1-specifications-english/images/img-24.png)
Installation Instructions
25
Figure 15 – Select the network card used to connect to the C-Touch Colour
7) The software will search for C-Touch Colour Touch Screen units. It is
likely that none will be found. If the C-Touch Colour unit has been
found, go to step 12.
8) You will be asked to select the type of network (
Figure 16). Select
Standalone, and click Next.
Figure 16 – Select the network connection type