Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
C-Touch Colour Touch Screen
26
9) The Transfer Utility software will suggest an IP Address to be
programmed into the C-Touch Colour unit (
Figure 17). This address is
chosen to be compatible with the PC you are using. It is sent to the
C-Touch Colour which will ask you to confirm the new IP Address
(
Figure 18). Press Yes on the C-Touch Colour unit.
Figure 17 – An IP Address will be suggested for the C-Touch Colour
Figure 18 – Press Yes on the C-Touch Colour to confirm the IP Address
10) The C-Touch Colour will advise you that the Address Type has been
set (
Figure 19). Press OK on the C-Touch Colour to clear this message.