Specifications

Installation Instructions
31
Figure 26 – The Control page in the Transfer Utility software
19) Ensure that the time on your PC is set correctly. If not, change the
time. This can be accomplished by double clicking the clock on the
bottom right of the screen (if present).
20) Click the “Set Time” button in the Transfer Utility software. This will set
the time on the C-Touch Colour to the time set on your PC. No
feedback is given to indicate the time on the C-Touch Colour has been
set.
21) Type a name in the field that will identify the C-Touch Colour when
controlled via Ethernet. Click the “Rename C-Touch Colour” button.
Click Yes when asked to confirm the change (
Figure 27). Renaming
the unit is especially useful if multiple C-Touch Colour Touch Screens
are to be connected to a common Ethernet network.
Figure 27 – Confirming a name change
Using the C-Touch Colour on a network follows the same
principles. You may need assistance from the network
administrator.