Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
![](/manual/clipsal/5000ctc3-series/1-specifications-english/images/img-31.png)
C-Touch Colour Touch Screen
32
14.0 Electrical Specifications
C-Touch Colour Touch Screen
Parameter Description
Supply voltage 5 V DC, 30 W maximum via power pack*
Display type 6.4 inch TFT Colour Active Matrix LCD
Display resolution 640 × 480 pixels
Display luminance 300 cd/m²
Display contrast ratio better than 100:1
Viewing angle left, right, down: 70°; up: 40°
Backlight lifetime (typical) 50,000 hours, factory exchangeable
Touch surface durability 35 million touches in any one location,
1 million touch slides
C-Bus supply voltage 15 to 36 V DC @ 20 mA required for
normal operation. Does not provide
current to the C-Bus Network
C-Bus control functions Load switching and dimming, scene
control, scheduling
C-Bus connection 2 × C-Bus RJ45 (parallel)
C-Bus System Clock Software selectable
Video connection
1 × Composite Video Out (75 Ω RCA)
PAL or NTSC selectable
Other connections 2 × USB type A, 2 × Ethernet RJ45,
RS-232 DB9, Audio Line In (3.5 mm
stereo), Audio Line Out (3.5 mm stereo),
Infrared In (3.5 mm mono), PS2 key-
board, 4 pin Power
Processor VIA Eden Chipset, 300 MHz
Warm up time 2 minutes
Operating temperature range 10 to 30 °C
Operating humidity range 10 to 90% RH (non-condensing)