Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
Installation Instructions
5
1.0 Product Range
Product Facia Style Catalogue Number
Stainless Steel BS5000CTC
Brass BB5000CTC
Neo 5050CTC
Glass, Cream 5080CTC-3
Glass, Black 5080CTC-6
Glass, Mid-Brown 5080CTC-7
C-Touch Colour
Touch Screen
Glass, White 5080CTC,GF
Infrared Remote Control — 5035TX
Nail Bracket — 5000CTCNA
Wall Box — 5000CTCWB
Power Supply — 5000CTCPS
2.0 Important Notes
• Do not replace, extend or shorten the Power Supply’s DC output cable.
Doing so may result in damage to the C-Touch Colour or Power Supply
unit, and void your warranty.
• Do not connect mains directly to C-Touch Colour units.
• Ensure you connect the pink C-Bus cable to one of the two C-Bus RJ45
connectors on the left side of the C-Touch Colour (looking from the
front). Do not connect the C-Bus cable to a C-Touch Colour’s Ethernet
RJ45 connector!
• Using any non-C-Bus software with C-Bus hardware without the written
consent of Clipsal Integrated Systems may void any hardware
warranties.
• To comply with EMC regulations the included ferrite filters must be
fitted to any audio, video and IR cables connected to the C-Touch
Colour unit. Refer to sections 7.3 and 7.4 on pages
19 and 20.