Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
C-Touch Colour Touch Screen
6
• Cabling for this product should be performed by a suitably qualified
person, in accordance with the laws and requirements of the state or
country of installation.
• Do not over tighten the screws when securing the C-Touch Colour unit
to the wall. Doing so may distort the casing, making attachment of the
facia more difficult.
3.0 Description
The C-Touch Colour Touch Screen (C-Touch Colour) allows sophisticated
control of an entire C-Bus system from one location.
Using appropriate software, the unit can be configured to look and
operate in a manner convenient to the user. Refer to page
23 for further
details.
3.1 Packing List
The items
*
included with the C-Touch Colour package are shown in
Figure 1. They are:
• C-Touch Colour Touch Screen (LCD covered by protection sheet)
• C-Touch Universal Power Supply with 4 metre mains cable and
4 metre DC cable
• programming lead (2 metre red crossover network cable)
• RJ45 Cable Joiner
• 2 × ferrite filters
• cleaning cloth
• Installation Instructions (this booklet)
• User’s Guide
• Warranty and Registration card
• 4 × mounting screws (finish to suit touch screen style).
• 5035TX Infrared Remote Control.
*
Subject to change without notice