Specifications
Table Of Contents
- Contents
- 1.0 Product Range
- 2.0 Important Notes
- 3.0 Description
- 4.0 Definitions
- 5.0 Installation Procedure
- 6.0 Mounting Instructions
- 7.0 Wiring Details
- 8.0 C-Bus System Clock
- 9.0 C-Bus Power Requirements
- 10.0 Power Surges and Short Circuit Conditions
- 11.0 Megger Testing
- 12.0 Programming Requirements
- 13.0 Using the C-Touch Colour Transfer Utility
- 14.0 Electrical Specifications
- 15.0 Mechanical Specifications
- 16.0 Standards Complied
- 17.0 Warranty
C-Touch Colour Touch Screen
8
3.3 Infrared Remote Control
The C-Touch Colour is equipped with an Infrared Remote Control, used to
select scenes and switch loads on, off, or adjust their level. The remote
control functionality is incorporated into a software project. The available
functions depend on how the C-Touch Colour is programmed. If multiple
C-Touch Colour units are installed, the same remote control can talk to
each of them.
Figure 2 – The Infrared Remote Control
4.0 Definitions
Term Definition
Load An electrical device (such as a light) connected to a
C-Bus output unit (such as a dimmer).
scene A series of actions across multiple outputs, triggered by
a single button. For example, on arrival home you could
use a scene to switch on lights in the hallway, kitchen
and lounge, and switch on a heater.
schedule A sequence of events to occur at particular instances in
the future.
Backlight The light behind the LCD screen providing visibility in
varying lighting conditions.