Colour Touchscreen 5000CTC3 Series User’s Guide
Contents 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 Product Description Capabilities Using the Touchscreen 3.1 Typical Page for Controlling Appliances 3.2 Configuration Page Remote Control Scenes Schedules Care Instructions Removing and Installing the Fascia Specifications Two-Year Warranty Installer Details 3 5 6 7 8 9 10 10 11 11 13 14 15 Copyright 2011. Schneider Electric Australia Pty Ltd. All rights reserved. The information in this document is provided in good faith.
5000CTC3 Series 1.0 Colour Touchscreen User’s Guide Product Description The colour touchscreen is a configurable controller and scheduler for C-Bus systems. It has infrared remote capability and a backlit colour display touchscreen. The unit mounts in a wall and connnects to the C-Bus network, providing control and scheduling of services throughout a home or commercial installation.
5000CTC3 Series Colour Touchscreen User’s Guide Figure 1 shows the features of the front side of the unit. Normally, you do not need to remove the front fascia. It must be removed to gain access to the reset button. See the instructions later in this guide for removing and installing the fascia. Touchscreen Front fascia Figure 1.
000CTC3 Series 2.
5000CTC3 Series 3.0 Colour Touchscreen User’s Guide Using the Touchscreen The colour touchscreen is configured with software customised for a particular location (such as your home or office). The software typically presents a main page with buttons that link to other pages. Most pages contain buttons that control appliances such as lights, fans, and curtains. Some pages contain slider controls or radio buttons that adjust lighting levels or select from a range of options.
5000CTC3 Series 3.1 Colour Touchscreen User’s Guide Typical Page for Controlling Appliances Figure 4 shows an example of a page that is used to control lights and fans in a kitchen. The page includes: • Scene buttons that set appliances to specific levels. For example, the Cooking button sets the kitchen and bench lights to their highest levels and switches the exhaust and range hood fans on. • Switch buttons that allow you to toggle appliances on and off.
5000CTC3 Series 3.2 Colour Touchscreen User’s Guide Configuration Page The touchscreen’s software includes a configuration page, such as the one shown in Figure 5. This page allows you to customise your unit. The configuration page may have a different name, such as Tools, Utilities, Setup, Settings or System.
5000CTC3 Series 4.0 Colour Touchscreen User’s Guide Remote Control The colour touchscreen is supplied with an infrared remote control that allows you to control appliances from a distance. You can use the remote to trigger scenes, switch appliances and adjust lighting levels, depending on how the touchscreen was configured by the installer. If you have multiple touchscreen units (colour or black & white), you can use the same remote control for all of them.
5000CTC3 Series Colour Touchscreen User’s Guide Battery compartment Figure 7. Battery compartment in the 5035TX2 remote control 5.0 Scenes One of the benefits of an automation system is the combining of events to create a special effect or mood. An example of this is when a movie starts at a cinema. The house lights dim, the curtains open and the movie begins to play. You can reproduce this effect by creating a scene triggered by your touchscreen unit.
5000CTC3 Series 7.0 Colour Touchscreen User’s Guide Care Instructions The touchscreen unit contains electrical and electronic parts. Follow these guidelines to maintain the unit: • Clean the touchscreen regularly using the soft cleaning cloth provided. • Do not use chemicals or spray cleaners on the touchscreen or the fascia. • Do not operate the unit with wet hands. • Do not use hard, sharp objects to select the controls. Use your fingertip or the provided stylus. • Allow adequate ventilation.
5000CTC3 Series Colour Touchscreen User’s Guide To install the fascia, do the following: 1. Position the fascia over the touchscreen, with the IR and indicator windows on the right hand side. Ensure that the clips on the left underside of the fascia are positioned slightly to the left of the matching clips on the touchscreen. Clips 2. While applying forward pressure on the left side of the fascia (toward the touchscreen), push the left side to the right. You should feel the clips slot into each other.
5000CTC3 Series Colour Touchscreen User’s Guide 9.0 Specifications Parameter Description Supply voltage 12 - 36V d.c., class 2 Display type 16.3cm (6.
5000CTC3 Series Colour Touchscreen User’s Guide 10.0 Two-Year Warranty The 5000CTC3 Series Colour Touchscreen carries a two-year warranty against manufacturing defects. Warranty Statement The benefits conferred herein are in addition to, and in no way shall be deemed to derogate, either expressly or by implication, any or all other rights and remedies in respect to the Clipsal by Schneider Electric product, that the consumer has in the loacation where the product is sold.
5000CTC3 Series 11.0 Colour Touchscreen User’s Guide Installer Details Parameter Description Name Company Address City / Suburb State Postcode / Zipcode Country Voice Phone Mobile Phone Facsimile Email Web © 2011 Schneider Electric. All Rights Reserved.
Technical Support and Troubleshooting For further assistance in using this product, consult your nearest Clipsal by Schneider Electric Sales or Technical Support Office. Australia Technical Support Hotline 1300 722 247 New Zealand Technical Support Hotline 0800 888 219 United States Customer Information Center 1 888 778 2733 lightingcontrol.support@us.schneider-electric.com CIS Technical Support email: cis.support@clipsal.com.au Schneider Electric (Australia) Pty Ltd Contact us: clipsal.com clipsal.
