Specifications

12 of 36

50x0CTC3 Series C-Touch Colour Touch Screen Installation Instructions

To mount the touch screen in the wall box, do the following:

1. Before rendering or plastering, attach the wall box to masonry or a beam of the

wall framing.

2. Feed the signal and power cables through the holes in the wall box. The use of

conduit is recommended (refer to Figure 10).

3. After the wall is rendered or plastered and a hole is provided for the touch

screen, hold the touch screen near the wall box and plug in the cables into

the unit.

4. Attach the touch screen to the wall box using the 4 screws provided. Make sure

that the cables are clear of the mounting screws. Do not overtighten the screws.

Figure 10. Wall box installation

Figure 11. 4 screws hold the touch screen in place.