Specifications

21 of 36
50x0CTC3 Series C-Touch Colour Touch Screen Installation Instructions
© 2012 Schneider Electric. All Rights Reserved.
2. If your PC and the touch screen are both connected to a common Ethernet
network, start the C-Touch Transfer Utility by clicking the C-Touch Transfer
Utility in the PICED folder in the windows start menu, or select ‘Transfer to Unit’
in PICED‘s Transfer menu and continue to Step 11. If both devices are not
connected to a common network, continue with Step 3.
3. Remove the fascia if it has been fitted to the unit.
4. Plug the supplied programming lead (red crossover cable) into the RJ45 socket
on the front right side of the touch screen.
5. Ensure that your PC is switched on and plug the other end of the crossover
cable into the Ethernet socket on your PC.
6. Start the C-Touch Transfer Utility by clicking the C-Touch Transfer Utility in the
PICED folder in the windows start menu, or select ‘Transfer to Unit’ in PICED‘s
Transfer menu.
7. If your PC has multiple network adapters (that are enabled), you see a list of
available network devices. If the screen is not displayed, click Select Network
Adapter from the Search menu. Select the network adapter where the patch
cable is connnected and Click OK (see Figure 18).
Figure 18. Select the network adapter used to connect to the C-Touch Colour