Specifications

6 of 36
50x0CTC3 Series C-Touch Colour Touch Screen Installation Instructions
© 2012 Schneider Electric. All Rights Reserved.
1.2 Infrared Remote Control
The touch screen is supplied with an infrared remote control that is used to trigger
scenes, switch loads and adjust lighting levels. The remote control functions are
incorporated into a software project. During programming, the functions available
to the remote control are set. If multiple touch screen units are installed, the same
remote control can talk to each of them.
Term Definition
Load An electrical device (such as a light) connected to a C-Bus
output unit (such as a dimmer).
Scene A series of actions across multiple outputs, triggered by a
single button. For example, on arrival home, you could use a
scene to switch on lights in the hallway, kitchen and lounge,
and switch on a heater.
Schedule A sequence of events set to occur at particular times in
the future.
Backlight The light behind the LCD screen providing visibility in varying
lighting conditions.
1.3 Definitions
Figure 3. Infrared (IR) remote control.